Preview
CS2-A-3000-100-98-NC
CS2-A for Nitro Cooler (NC ) for use with a Nitro Cooler unit. Delay capable and 40% slower retun stroke when compared to CS2 spring without Nitro Cooler.
Every time a CS2 controllable gas spring is stroked, energy is transferred from the press to the spring. The amount of energy transferred is a function of the spring force multiplied by its stroke length. CS2-NC are for use with a Nitro Cooler™. Ideal for a small number of springs that operate at higher production rates and therefore require cooling.
Diagram / specifications section
Preview
| L | Minimum Length (in) | 9.53 |
| S | Stroke Length (in) | 3.86 |
| Y | Total Length (in) | 13.39 |
Item specifications
- End Force At Full Stroke (LBF)9400
- Force Increase By Temperature Percent Per (°F)0.17
- Gas Volume (CuF)0.027192293
- Initial Force at max. pressure (lbf) 6744
- Max Charging Pressure (Psi)2175
- Max Piston Rod Velocity (FtMin)157.48
- Max. Operating Temperature (F)176
- Min Charging Pressure (PSI)362
- Min. Operating Temperature (F)32
- Recommended Max Strokes Per MinuteSee separate info.
- Weight (lb)29.348
