Initializing...
Preview
LM-7500-Hyson

LM-7500

The LM-lug is used to clamp the gas spring vertically upright to the tool. The gas spring can be clamped down using 2, 3 or 4 LM-lugs.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.

Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.

Important! The LM-lugs are only to be used to mount the spring vertically upright.
The LM-lug is used to clamp the gas spring vertically upright to the tool. The gas spring can be clamped down using 2, 3 or 4 LM-lugs.
If only 2 lugs are used, then locking plate L must also be used to fix the gas spring.

Note: When using locking plate L together with LM-lugs, the spring cannot be hosed together as the L-plate will cover the gas charge port of the gas spring.

Important! The LM-lugs are only to be used to mount the spring vertically upright.

Diagram / specifications section

Preview
Preview
CC (in)1.969
DD (in)0.846
EE (in)0.551
FF (in)7.677

Similar items

LM-5000
LM-5000_Hyson
LM-5000
L-5000
L-5000_Hyson
L-5000
LM-10000
LM-10000_Hyson
LM-10000
LM-3000
LM-3000_Hyson
LM-3000
FC-500
FC-500_Hyson
FC-500